Gypsum Board production line

>>back

Gypsum Board Production Line

category:Gypsum Board production line | updatetime:2015-11-16 14:42:11 | hits:

Gypsum board Characteristics

1.      Fireproof

2.      Waterproof

3.      Light weight

4.      Sound insulation

5.      Beautiful apperance

6.      Eay-installation

It is widely used inconstruction and interior ceiling wall and partition


Computer electronic feeding system

Automatic feeding system include software group, PLC, communication module, A / D module, D / A module, inverter, electromagnetic flow meter, weighing sensor, speed sensor and other equipment.

Automatic feeding system Features

We set the speed of the powder, slurry, agents, and other additive according to the speed of the gypsum board forming speed, when the gypsum board forming speed changes, the other equipment speed will adjust automatically, then it can achieve automatic ratio adjustment, so it can achieve high precision and save labor and improve the automation level.

IPC and PLC can achieve communication, and transmit data with each other to achieve central control, you can watch each section of the operation situation, data, and you can print the date and flow chart.

Drying section:it adopts heat exchanger dryer

The drier has 4-12 layer rollers, and three zones with vertical airflow. In addition, we also have some thermal insulation measures to improve the thermal efficiency of the dryer, Such as the introduction of a dry seals, increase the thickness of the drier and upper and lower cover, and also increase the thickness of heat insulation material.

Coil pipe heating system and heat exchanger heating system difference

The temperature is not even in the coil pipe drier, there has a larger temperature difference between up pipe and down pipe, it is easily to burn the gypsum board because of the higher temperature.

Many failures

Occupy a large room, it is difficult to construct and install and maintain.

With large temperature difference

It is not easy to repair and maintain

It is difficult to control the temperature

Heat exchanger heating


Do not need coil pipe, it can improve the installation speed and save money

It is easy to dry the gypsum board, the fan can remove the moisture

The temperature is evenly. It is easily to control the temperature, it has three zones, It is slowly dehydration zone and high temperature dehydration zone and low temperature cooling zone, it can improve the quality of the gypsum board  

Automatic edge cuttergrinding and recyclingsealingstacking system introduction

2# transverse adopts automatic edge cutting and grinding and sealing and stacking system in whole complete, after cutting the gypsum board edge, it will grind into small powder automatically, and the fan will collect the small powder, and recycle to the gypsum powder factory, and you can use it to produce gypsum powder again. It can save 6 workers each day, so it can reduce the cost and save labour.Our machine has the automatic sealer, after sealing, the gypsum bard will be transferred to stacker and then be transferred to warehouse for selling. It can save a lot of workers and labor, and it can reduce the cost and improve the automation level.

 


Gypsum board production line Capacity List reference

年產量/M2

Annual capacity/M2

日產量()

Day capacity(sheet)

1200×2400×9mm

干燥機層數

Drier layer

烘干方式

Heating system

控制方式

Control system

燃料

Fuel

2百萬

2Million

2000

4

 

 

換熱器(縱氣流)

Heat exchanger

vertical Air-blow

PLC

煤、天然氣、重油等

Coalgasoil etc

300400

3-4Million

300400

6

PLC

500800

5-8Million

50008000

8

 

DCS計算機控制

DCS computer control

 

10001500

10-15Million

1000015000

10

20005000

20-50Million

2000050000

12

換熱器(橫氣流)

Heat exchanger

Horizontal Air-blow

 

 


Please contact with us for more detailed information and introdution.


Contact us

E-mail: gypsummachine@aliyun.com

Mobile: +86 13205384412

TEL: +86 538-5825778

Address: High-Tech Development District, Taian City, Shandong Province, China

Message
2018国产大陆天天弄